Switching

Best explained with a diagram... (the port shown here is on a QFX 5100) Single-tagged VLANS 2-513,1000 ingress | | | \_/ ----------------- | | | ge-0/0/5 | | ...

Hi Techie, Do you mean a single interface within the range you're going to disable? Or match the range from a given 'down' statement on the interface? I don't believe there is a way you can create a rule to disable the 'down' interfaces, and ...

Thanks for the reply, so on one switch I want to disable the 'down' ports looks like this...is there an option to select only the 'down' ports I want to disable in a range? Thanks! tech@********-swi-01> show interfaces terse | match "down" ge-0/0/0 ...

Five switches are stacked which are EX4200-24f, These switches are connected to gateway router through uplinks and default route is created having next-hop is gateway router directly connected to these stacked switches and working fine. after that these ...

Hi There. It seems you are trying to run LACP over a L2 service. Please keep in mind that LACP frames are native or untagged so therefore your switch will send LACP frames to the ISP as untagged. This means the ISP will need to transport the frame natively ...

In my case, I have 2 ISP connection between Junos devices. First ISP EX4400(ge-0/0/14)

Hi Suraj Singh, I hope this example will help you. https://supportportal.juniper.net/s/article/LACP-between-two-devices-with-a-transit-device-in-between-using-Layer2-Protocol-Tunneling?language=en_US In this example ae0 interface configured as ...