Switching

Hi all, May i know which model of EX switch support feature instance-type virtual switch like this url https://www.juniper.net/documentation/us/en/software/junos/multicast-l2/topics/topic-map/layer-2-virtual-switch-instances.html I'm try check ...

Hi, I have a QFX10002-36Q, and I configured sFlow with the following commands: set protocols sflow polling-interval 20 set protocols sflow sample-rate ingress 10000 set protocols sflow source-ip 10.x.x.246 set protocols sflow collector 172.x.x.210 set ...

I'll try that out on some random switches that I get alerts saying they are in the high range. ------------------------------ JOHN WILLIAMSON ------------------------------

This kb for evaluation of potential EX switch causes for high CPU and filters to block the traffic causing the increases. https://supportportal.juniper.net/s/article/EX-Troubleshooting-and-resolving-high-CPU-utilization-on-EX4300?language=en_US ...

Start by identifying which process: To show software processes: Make sure you are in operational mode. Enter the 'show system processes extensive' command. This command shows the CPU utilization on the device and lists the processes in order of ...

I noticed a switch in the Mist dashboard that indicated the CPU was well up in CPU utilization. Indocator was red. SO I checked the CPU with the show chassis routing-engine command and got this report: show chassis routing-engine Routing Engine ...

Should be a simple question, maybe I missed something and need help desperately. Setting up vQFX with either 17.4 or 18.4 image within eve-ng, but never able to ping across the link. What did I miss vQFX: delete interface set interfaces em1 unit 0 ...