Switching

I would start by confirming the lldp status on the affected switches show lldp neighbors And if the neighbors are indeed not up and running, confirm that both the interfaces and the lldp protocol sections are complete on the both adjacent switches ...

Hi, It looks like you've set up your regex filter correctly for matching the log messages. However, to ensure that the matched log entries are sent to your syslog server, you'll need to make sure that your system is correctly configured to forward the ...

Hi Sheetanshu, What is did is set the Data VLAN and VoIP VLAN on different port-profile along with multiple supplicants option enabled. ------------------------------ MUHAMMAD SAAD ------------------------------

Hi everyone. We have a 3-member VC out of 3 x QFX5200-32C running JunOS 22.2R3-S3.18. After an outage caused by a faulty VC-Port cable (generating a lot of CRC errors), we turned our attention to adjust monitoring to catch this. After having enabled ...

I have a few locations at our schools where the core switch doesn't "see" the edge switch, but they work just fine. I noticed this first in the Mist dashboard. The edge switch didn't show what the uplink port was connected to. In the CLI, the edge switch ...

Yes, well, there's no dual root on EX2300. There's instead a «recovery snapshot» feature: Recovery and Non-recovery snapshots on Junos devices ------------------------------ Olivier Benghozi ------------------------------

Hi Muhammad, It's great that it is working. But, this is not exactly how it should be configured in the scenario where you are expected to get the VLAN from the RADIUS dynamically. Here, it works because the VoIP VLAN is statically set on the port-profile ...