Switching

 View Only
last person joined: 8 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Ask AI Documentation Knowledge Base Day One Books Free Trial

Latest Discussion Posts

  • Hi, RSTP edge should be enabled only on the access ports connected to end devices that do not send STP BPDUs. E.g. on an access port connected to a laptop. If the RSTP edge is enabled on the IOT controller ports, and the IOT controllers send BPDUs, ...

  • Hi, If I disabled RSTP edge on the port-profile, then due to spanning tree topology change, we are getting drops in the network due to which services gets affected. So what will be the way out of this as we want to connect IOT controllers with juniper ...

  • Hi, It looks like the IOT controllers are sending BPDUs to the switch. As the port is configured as RSTP edge, the switch will block if any BPDU is received on these ports. Please disable RSTP Edge on your port-profile. "clear bpdu error interface ...

  • Anybody can provide assistance? ------------------------------ MUHAMMAD SAAD ------------------------------

  • Hello Team, We are facing an issue. A Juniper switch is connected with an IOT controller that has 2 ports (one for input and the other for output). So when this controller gets connected in series one after the other, the juniper switch blocked the ...

  • Hi John, The warning is harmless and transient and can be ignored. It just says that the system extension providers exist (check the output of "show configuration system extensions" and "file show /var/db/extensions.allow" ) Regards ------------------------------ ...

  • I started updating a test switch, before updating all our EX switches and when I updated from 21.4 to 22.4 I get the warning in the title of this thread. I haven't seen that before. Is there some action I need to take before moving forward to 23.4? ...

Announcements

  • Introducing Juniper Support Portal (JSP) Mobile App for iOS

    The Juniper Support Portal (JSP) Mobile App is now available for customer use on iOS platforms. The app is designed to provide mobile access for on-the-go service support. 

    What’s available?

    • Live Chat Support
    • Instant Notifications
    • Knowledge Base Access 

Unanswered Posts

Top Contributors in the Community