Switching

We have a standalone/solo EX4650-48Y-8C currently running version 21.4R3.15 Junos. Is it safe to upgrade directly to the latest Juniper recommended version 24.4R2-S4 or are there intermediate versions we should step through? If not, where I can view ...

We all have 2 options: Format Install or Step-Upgrade. If it's not in the VC and is a standalone switch you can GA with format installation as downtime will be less than 50 minutes. If it's in VC, it's better to go with a step upgrade. In your case, ...

Are you using MCLAG because there are servers connected to these switches via MCLAG anyway? Having MCLAG to connect to an upstream switch but having IPs only on individual switches seems like an odd design choice (I'm sure you have your reasons, I just ...

Hi everyone, I have a question about a Juniper QFX MC-LAG design and would like to know if anyone has seen similar behavior. We currently have a single Cisco Port-Channel with one physical link to each QFX, forming an active-active MC-AE. The OSPF transit ...

Hello, Thank you very much for the confirmation. ------------------------------ OLIVIER PACI ------------------------------

Hello Oliver, you can upgrade directly, no need to go for any intermediate release. ------------------------------ ------------------------------ If my answer provides the solution, please mark my post as "Best Answer". If you think my answer helps, ...

I have an EX4400-24X switch running Junos OS version 23.1R1.8, and I would like to upgrade it to version 23.4R2-SX. Can I upgrade directly to this version, or do I need to go through an intermediate release first ? Thank you in advance for your ...