Switching

I thought I had asked this question before, but I didn't find it in the My Elevate list. I apologize if it is in the community somewhere. I have the following config on our site EX4600s with different IPs of course, and this LAG is no longer needed. ...

Not sure if this helps any. https://www.juniper.net/documentation/us/en/software/junos/user-access/topics/topic-map/user-access-radius-authentication.html#id-juniper-switching-filter-vsa-match-conditions-and-actions Regards,

We have Mist deployment I need to support handsets and the allocation of VLAN and QoS to the handsets via LLDP-MED I'm using 802.1x to allocate all the ports on the switch But we have been running into issues with the allocation of handset ports ( ...

This message was posted by a user wishing to remain anonymous Hello. I have a question about MC-LAG option(session-establishment-hold-time). * question 1) What does "session-establishment-hold-time" mean and how does setting the command change ...

Is the card(s) fiber? ------------------------------ TEDD ------------------------------

Hello everyone, I have a Dell R650 server with an Intel Ethernet Converged Network Adapter x710 network card, VMware 8.0 operating system, the server works well interconnected to a Juniper 4550 switch, but when I migrate it to a Juniper 4600 switch ...

By the kb notes I would say that if a reboot clears the issue there was some kind of memory or software corruption. But if the problem persists after a reboot then there is a hardware issue with either the SRX or SFP module. ------------------------------ ...