View Only
last person joined: yesterday 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Knowledge Base Day One+ Technical Bulletins

Latest Discussion Posts

  • Profile Picture

    junos os

    I created a new interface on port on xe-2/0/2 added all the necessary information to it, when i exit configuration mode and do "show interfaces xe-2/0/2" it gives me an error message. "error: device xe-2/0/2 not found" why would this be happening? ...

  • Profile Picture

    Mixed mode lacp for qfx5120

    This message was posted by a user wishing to remain anonymous As stated in the documentation: https://www.juniper.net/documentation/us/en/software/junos/interfaces-ethernet-switches/topics/topic-map/switches-interface-aggregated.html Aggregated ...

  • Example topology: custA / custB > switch1 > EX4650 > switch2 > custA / custB custA outer tag 101 custB outer tag 102 The EX4650 should allow any inner tag on both vlan 101 and 102. Does trunk mode also pass double tags or is something additional ...

  • We are configuring DHCP snooping across our enterprise and have run into something interesting. When we configure it on Non-ELS EX switches for our wireless vlan, we never see a wireless binding. We only see successful bindings on ELS EX switches on that ...

  • Spanning tree is a protocol that prevents layer 2 loops in standard vlan stack switching. From you diagram I wonder if you have a device with two ports connected to the same vlan on two edge switches that are then joined via the core. This would be ...

  • Hi Steve, Thanks for your answer. In my case, uplink SW is core SW. My network is a typical hierarchical design; Core - edge - end device |_edge - end device .... I chased MAC from the edge to the core. Core indicated ...

  • Hi, We have a Core configured in VC of 2 members (QFX5100 96s) and all the Access switches are EX4300 with two uplink to core which are configured as AE. From yesterday i am seeing a MAC move on many siwtches, corss checked for rstp configuration ...


  • Elevate Community Updates

    We are making improvements to the Community based on your feedback. Keep an eye out for updates as they are implemented. 

    Please give us feedback any time by posting in Community Talk.

Unanswered Posts

Top Contributors in the Community