View Only
last person joined: yesterday 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Knowledge Base Day One+ Technical BulletinsFree Trial

Latest Discussion Posts

  • We just moved our HQ, updated the SRX's and EX devices to their respect JUNOS 21.4R3 recommended versions. Everything works fine. Ran the request system snapshot slice alternate on the SRX345's, no problems. Tried to do the same for the EX4600 ...

  • I had a recent issue with a new setup and connectivity issues. After looking further I found an arp entry in the switch for an interface with a mac of a different device, external to the switch infrastructure. I have no idea how that happened. I did ...

  • Thanks for the reply, That explains everything. So the YM seems to be either DAC in the QSFP ports or optical only otherwise. ------------------------------ JOHN TRETHEWEY ------------------------------

  • Hi, Yes, you can classify the traffic on the edge port by source/destination IP/port, DSCP values, etc. The problem is that there is no term 2 in the firewall-filter, so all the L2 traffic (ARP, broadcast,etc.) are dropped by default. Can you please ...

  • Harry, Thanks for the reply, at my site we are running 23.2R1.13 and at another site 23.1R1.8 ------------------------------ JOHN TRETHEWEY ------------------------------

  • Thanks Steve. Here is the config that is working for me. I have 2 - 20Gb ae groups an 40Gb together. I can pull up to 4 interfaces and still have connectivity. I also have a sub interface on the SRX so I can add addition VLAN / Interfaces and ...


Unanswered Posts

Top Contributors in the Community