Switching

Any port on the switch can be configured for access if desired. ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired) http://puluka.com/home ------ ...

How can i use uplink ports as downlink ports? Do I need to configure them as access ports? ------------------------------ ADRIAN ALFONSO ------------------------------

Hi, "TTL 1 then discard" would mean that if the device receives a packet that has a time-to-live value of 1 hop (which would mean that the packet would be destined for that device, but this depends on your topology and design) then as an action of the ...

Hello Steve. The info you provided is when the client receives an address. What I am interested in is more when a rogue dhcp is connected. I found in /var/log/messages entries when the dhcp server is being blocked. Was wondering if a command would ...

I appreciate Mr. Seetanshu the way you answered my previous question and this one. I managed myself to build the desired filter and term. One thing I have noticed in an old junos device which I have as a spare a term like " TTL 1 then discard " written ...

Hi, Here, for the sake of explanation, I would assume that your internal network is 10.10.10.0/24. If I understood your requirement correctly, we can create the filters in the following way. 1. The term internal in the filter below will allow access ...

The running statistics are shown with show dhcp snooping statistics https://www.juniper.net/documentation/us/en/software/junos/security-services/topics/ref/command/show-dhcp-snooping-statistics-port-security.html The current status is monitored ...