Switching

Maybe this is not useful and you have decided against the easy way for some reason, but why is it that you want the phones "without LLDP-MED"? Even though the doc you referenced shows explicit trunk setup, we find it much more convenient to use the ...

Dang. Thanks for the clear explanation. So unless I route layer 3 only out to every access switch, then _all_ of my local multicast streams are required to be sent back to the core? Oof. Assuming about 1Gbps of streams from every space that has these ...

Hi, I believe the EX4100s run ELS JunOS Code. The native-vlan-id configuration has moved to the interface level of the hirachy. i.e. [edit interfaces] user@host# set interface-name native-vlan-id number Please refer to: https://www.juniper.net/documentation/us/en/software/junos/multicast-l2/topics/topic-map/layer-2-understanding.html ...

Yep, «this is how it is supposed to work». Long explanation: when a switch (or the Layer2 part of an L3 switch) sees an IGMP querier, or an IGMP router, or a PIM router, it actually sees an «mrouter». Therefore the port connected to it is defined as ...

Hi all, test@QFX5120-SW01# show forwarding-classes { ## ## Warning: statement ignored: unsupported platform (qfx5120-48y-8c) ## queue 0 best-effort priority low; ## ## Warning: statement ignored: unsupported platform (qfx5120-48y-8c) ...

Here's a diagram showing the arrangement. I don't get why the querier needs all the data flows, rather than just knowing that these multicast groups are available if anyone wants them. All of the multicast traffic is local within the av-rack ...

This message was posted by a user wishing to remain anonymous Hello Community, I am facing issues configuring VOIP. We are following the config from https://www.juniper.net/documentation/us/en/software/junos/user-access/topics/topic-map/802-1x-and-voip-on-switches.html ...