Switching

I ran the upgrade command a little differently this time. > request system software add /var/tmp/usb/ex4300-jinstall-ex-4300-20.4R3-S1.3-signed.tgz no-validate no-copy and that worked. no-validate skips the configuration compatibility check ...

Hello, We just purchased a Juniper EX3400-24P and it has version 18.4 installed. We want to install another version that we have so we can put it into production. However when I have tried to perform an Update and receved storage errors. show system ...

I found out HGoE mode was introduced in 24.2. I was confused because an older version showed the option, but it didn't work, and the current recommended version did not have the option at all ( Junos 23.4R2-Sx). After updating to 24.2R2-S3 I was able ...

We're working with JTAC on a FPC popping error messages. JTAC wants us remove / re-insert the FPC. I confirmed with JTAC that taking the FPC offline; wait 60s , then request chassis fpc 3 restart, will satisfy the need. Is there any thought ...

You might start to update to 23.4R2-S6 ------------------------------ Olivier Benghozi ------------------------------

By the way, the fixed release is now released. ------------------------------ Olivier Benghozi ------------------------------

I have an EX4100 VC which I have converted to HGoE mode because I would like to use some of the 10/25G ports as trunks and others as VCPs, however when I try to disable a VCP using "request virtual-chassis vc-port delete pic-slot 1 port 3 member 1" I ...