Switching

Ashton, Are you also statically configuring your VoIP VLAN using the "set switch-options voip interface" command? If so, can you temporarily deactivate and see if the phone will go in the proper VLAN? If this doesn't help, can you post the VSAs ...

Good morning, I went into different logs and watched the authentication process. It reports that it looses responses from the phone and deems is a failed authentication and puts it in "held". We are currently switching our RADIUS server from ISE to ...

I'm not sure I follow all the configuration here. But I see two things to check on. On the SSG cluster that is flapping master/slave roles this can be caused by issues with the HA connection between the two by configuration or cabling. Or the nsrp ...

This message was posted by a user wishing to remain anonymous Hi, Erdem! Remember that vQFX is splitted in two: RE and PFE. So, you should make sure to connect them through internal interface and wait until they synchronize. It can take from 3 to ...

Hello, I need to replace old SSG140 with SRX345 HA. My idea is to user 2 x Standalone EX2300 as external switches with multiple vlans to be able to connect same time both SSG and SRX. In that way I can try and test SRX345 configuration and revert ...

Also note: You must not configure both data and voice on the same VLAN. If you configure data and voice on the same VLAN, the configuration will not be accepted. If you have enabled 802.1X authentication on your switch and: The voice VLAN you ...

Ashton, Try using the Juniper-VoIP-VLAN VSA in your RADIUS attributes in ISE. Here is an example on how to configure it. https://www.juniper.net/documentation/us/en/software/nce/nce-213_ex_and_cisco_ise/topics/topic-map/nce-213-ex-series-switch-cisco-ise.html ...