Switching

 View Only
last person joined: 10 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Knowledge Base Day One+ Technical BulletinsFree Trial

Latest Discussion Posts

  • Profile Picture

    ARP issue in EVE-NG for vQFX

    Hello, I have installed EVE-NG in a bare-metal server and upgraded it to the latest (5.0.1-19 ) I am using vQFX 19.4R1 with the default template, QEMU Version 2.0.2 When connecting 2 vQFX and giving them IP addresses, they cannot ping using ...

  • Profile Picture

    RE: QFX5120 uplink ports

    Any port on the switch can be configured for access if desired. ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired) http://puluka.com/home ------ ...

  • How can i use uplink ports as downlink ports? Do I need to configure them as access ports? ------------------------------ ADRIAN ALFONSO ------------------------------

  • Hi, "TTL 1 then discard" would mean that if the device receives a packet that has a time-to-live value of 1 hop (which would mean that the packet would be destined for that device, but this depends on your topology and design) then as an action of the ...

  • Hello Steve. The info you provided is when the client receives an address. What I am interested in is more when a rogue dhcp is connected. I found in /var/log/messages entries when the dhcp server is being blocked. Was wondering if a command would ...

  • I appreciate Mr. Seetanshu the way you answered my previous question and this one. I managed myself to build the desired filter and term. One thing I have noticed in an old junos device which I have as a spare a term like " TTL 1 then discard " written ...

  • Hi, Here, for the sake of explanation, I would assume that your internal network is 10.10.10.0/24. If I understood your requirement correctly, we can create the filters in the following way. 1. The term internal in the filter below will allow access ...

Announcements

Unanswered Posts

Top Contributors in the Community