Switching

I don't believe there was ever an option for snapshotting internally on the EX4600 and EX4300-MP. Snapshotting is available on the standard EX4300's just not the Multigig ones. ------------------------------ HARRY ------------------------------

Hi Spuluka Big Thanks for your reply . We have already reformatted the switch for now . I will try the same in the next switch if i get the same issue . ------------------------------ Rahul Aswal ------------------------------

You could try loading the factory default configuration then setting the root password. load factory-default ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet ...

When did the snapshot feature change for the EX4600 and EX4300's? Was it hardware, or JUNOS "enhancements"?

Hi Todd Thanks for your reply . Its a version 12.0 old switch with NO configuration and one of our Field engineer was trying to set root authentication password to it . However, the device is showing that attached error . On further troubleshooting ...

Hi, There is no alternative partition to snapshot on the EX4600 and EX4300-MP devices. The EX4600's let you snapshot to a USB drive and the EX4300-MPs don't support the snapshotting feature. Many Thank ------------------------------ HARRY --- ...

The basic point of having QoS is to prioritize traffic when they hit links that will be over capacity so you make sure the right flow is first in line or that a big flow does not kill everything else. In the network you describe where this is only configured ...