Switching

 View Only
last person joined: yesterday 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.

If you have a question or a use case, there are likely others experiencing or who worked through the same thing. Don't hesitate to jump in and ask or share your knowledge!

Need additional guidance?  Check out these Juniper Resources.

Documentation Knowledge Base Day One Books Free Trial

Latest Discussion Posts

  • Hello, We have 2x Juniper QFX10002-36Q i want to know do we need any special license to use 4M FIB and 10M RIB or is it based on honor based like other models? Also, What about BGP?

  • We have a requirement to change one of my QFX5120-AFO2 switches to DC power supply. Is this possible with existing AC-Chassis or should we purchase a new DC-Chassis Switch. I tried to find an answer on the community but only found that its possible ...

  • Good Morning Cornelis, Two questions: Are you able to share your configurations for the interfaces ? This will make it a bit more easy for people in the community to help you. Did you try auto negotiation on both sides ? Or did you put the ...

  • Good day I am trying to setup a LACP link between our Fortigates 200f's (which is in HA active-pasive) and Juniper EX3300 switches however the link does not come up. Could someone please guide on the correct setup for the LACP link from Fortigate ...

  • Another thought is that your AP is plugged into an access port and not a trunk port. If a trunk port, is it allowing for the VLAN your SSID is tied to? ------------------------------ Matt Sherman ------------------------------

  • Hi, You probably didn't set that SSID to be tagged with the correct VLAN. Look at the attached document. Go to "Finish the AP Configuration - WLAN Configurations", step 15. To quickly rule out your DHCP configuration, create an access port on the ...

  • Hi Everyone, I was trying to add a new SSID to my LAN and all is well, but the users don't get IP address from my DHCP, which is based on windows. All configurations are fine as the switches have the VLAN and the default gateway for the DHCP scope ...

Announcements

  • AI-Driven Support via JSI

    Get AI-driven support by connecting your devices to Juniper Support Insights (JSI). Join one of our upcoming “Jumpstart JSI Ask the Experts” meetups to learn more about JSI and ask the panel of experts your questions. Select the session that best suits your schedule:

    Tuesday, June 25 from 8:00-8:45PM PT: Register Now
    Wednesday, June 26 from 8:00-8:45AM PT: Register Now

Unanswered Posts

Top Contributors in the Community