Switching

The running statistics are shown with show dhcp snooping statistics https://www.juniper.net/documentation/us/en/software/junos/security-services/topics/ref/command/show-dhcp-snooping-statistics-port-security.html The current status is monitored ...

Dear Team Please help me to create two filter and term for the following condition from JunOS router. discard traffic from outside network to a particular port destined for internal public server. discard any traffic from outside network to particular ...

Hello all. I am currently looking at dhcp snooping on EX4300 switches. I have a few questions. If someone plugs in a dhcp server on an untrusted port. Where would I look to find out that something was blocked. Any counters or logs to check that out? ...

Hello experts, I recently tried to use input-vlan-map and pop-swap on one of our QFX5120-48Ys, and while the command the accepted the logs showed the platform didn't support this feature. A couple of questions do you think this can ever be supported ...

To see if you actually need QoS in the first place, look at the tail drops. Here is a neat way of doing it that works in the EX3400 at least: > show interfaces ge-* extensive | match "Physical|^( +[0-9]+)+ *$" | except " 0$|Down" Physical interface: ...

Try "request system snapshot recovery" instead of it. ------------------------------ BALAZS KISS ------------------------------

I don't believe there was ever an option for snapshotting internally on the EX4600 and EX4300-MP. Snapshotting is available on the standard EX4300's just not the Multigig ones. ------------------------------ HARRY ------------------------------