Security

 View Only
last person joined: 5 days ago 

Securing your network and related platform configuration and troubleshooting with Juniper security technologies including Advance Threat Prevention, Cloud-Based Management Services, Cloud-delivered Security, Cloud Workload Protection, DDoS, Juniper Secure and other solutions.
  • 1.  Error when installing from loader via USB

    This message was posted by a user wishing to remain anonymous
    Posted 01-21-2022 11:09
    This message was posted by a user wishing to remain anonymous

    I have an old pair of SRX100B that I have at my home. I would like to reinstall Junos on them because they are issuing disk-related errors when booting up and one of them reboots constantly. I have a copy of the Junos version that was installed on them (12.1X46-D65.4) on a USB. When I attempt to follow the procedure for installing via the loader prompt, everything is fine until a certain point:

    Starting JUNOS installation:
    Source Package: disk1:/junos-srxsme-12.1X46-D65.4-domestic.tgz
    Target Media : internal
    Product : srx100b
    ERROR: Source media /dev/da1s1 does not exist

    At this point, the system starts the shutdown process and reboots. My flash is a 16GB flash. I can't help but think that the way my flash is partitioned might be the reason here. I formatted it using a Mac and the diskutil/newfs_msdos commands:

    diskutil zerodisk /dev/disk2

    sudo newfs_msdos -F 16 /dev/disk2

    diskutil mount /dev/disk2


    Any ideas what the problem might be?


  • 2.  RE: Error when installing from loader via USB

    Posted 01-22-2022 05:59
    Since the device is currently running you could try this procedure.

    Create a snapshot of the device onto the usb drive 
    request system snapshot media usb partition

    copy the installer file to the usb var/tmp

    Reboot to the snapshot
    request system reboot media usb

    Do the install to the internal drive with disk format option

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------