Security

 View Only
last person joined: 3 days ago 

Ask questions and share experiences with Juniper Connected Security. Discuss Advance Threat Protection, Policy Enforcer, SecIntel, Secure Analytics, Secure Connect, Secure Director and all things related to Juniper security technologies.

  • 1.  Traffic Selector on vSRX with encryption domain 0.0.0.0/0

    Posted 05-17-2022 10:14
    Hi,
    I have to configure an s2s vpn to a remote site and in the remote part they told me to enter 0.0.0.0/0 as the encryption domain towards their headquarters. I read that on vSRX this option is not provided and in fact it gives me an error. I wanted to ask if there was a way to handle this issue.

    Thanks a lot.


    ------------------------------
    LEONARDO LIBERATI
    ------------------------------


  • 2.  RE: Traffic Selector on vSRX with encryption domain 0.0.0.0/0

    Posted 05-19-2022 05:50
    If you have only a single pair with your 0.0.0.0/0 on the one side you can see if the proxy-id configuration option is available.  In this case you also need to configure the routes into the tunnel then by either dynamic routing or static routes.

    https://supportportal.juniper.net/s/article/SRX-Understanding-how-proxy-IDs-are-generated-in-route-based-and-policy-based-VPNs

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)
    http://puluka.com/home
    ------------------------------

    Original Message