Hi My Friend,
We're using Python (Junos PyEZ) to deploy configuration to Juniper MX router. Everything is OK for "set" command.
How can I deploy non-set command configuration such as ANNOTATE via Junos PyEZ? Thanks.
Normally we have to add annotate under edit mode (edit edit firewall filter AE207)term VLAN2841 {
/* ANNOTATE FROM COMMENT VLAN2841 */from {
/* ANNOTATE FROM COMMENT ae207.2841 */interface ae207.2841;
}
then {
/*ANNOTATE FROM COMMENT POLICER */policer 100M;
accept;
}
Display Set Command (can't find ANNOTATE)set firewall filter AE207 term VLAN2841 from interface ae207.2841
set firewall filter AE207 term VLAN2841 then policer 100M
set firewall filter AE207 term VLAN2841 then accept
------------------------------
Benjamin CL
------------------------------