I have a confusion with policers applied in inet and inet6 families and the contracted BW of a subscriber. If I apply policer for each family, do each family have the BW defined in the policers ? I mean, if I configure policers of 300MB for each families, the subscriber has a IPv4 device and IPv6 device and each one consume 300MB, then will the BW total of subscriber be 600MB (300MB IPV4 + 300MB IPv6)?
IPv4 END Device Subscriber interface:
Application with 300MB - policer inet 300MB
\ - policer inet6 300MB
\
| \_________ _______
| _______ @@@@@@@@@@@
| | | |
v | | @ @
|
ONT |--------- |
OLT |----------|
BNG |----------@
INTERNET @
|________ | |_______| |_______|
| @ @
/
| @@@@@@@@@@
/ Subscriber with
v / only 300MB' contract
Subscriber BW 600MB ? /
IPv6 End Device
Application with 300MB
------------------------------
PABLOXJE
------------------------------