Switching

 View Only
last person joined: 8 hours ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  SVI for same VLAN across switches

    Posted 19 days ago
    First off, sorry if my question sounds very silly as I'm a newbie … I have two EX4500 switches, both have VLAN10 allowed through trunks. I need RVI for inter-VLAN routing on both switches. Nodes connected to these VLAN ports will use this IP as their default gateway. Now, what is the process? Do I set same IP on RVIs on both switches?

    ------------------------------
    Zeead Tanjim
    ------------------------------


  • 2.  RE: SVI for same VLAN across switches

    Posted 19 days ago
    You would only need one RVI to become the default gateway per vlan.

    If you wanted redundancy if the two switches are not in a virtual chassis you would need to create two interfaces with different ip addresses and use VRRP for the default gateway assignment and failover.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------