View Only
last person joined: 2 days ago 

Ask questions and share experiences about EX and QFX portfolios and all switching solutions across your data center, campus, and branch locations.
  • 1.  CRC/Align , Framing errors: errors

    Posted 05-08-2022 09:00


    We are getting CRC/Align Framing errors: errors on interface. Changed the optics and port but problem still persist.
    Input errors:
    Errors: 49331, Drops: 0, Framing errors: 47011, Runts: 0, Policed discards: 0, L3 incompletes: 2320, L2 channel errors: 0, L2 mismatch timeouts: 0, FIFO errors: 0,
    Resource errors: 0
    Output errors:
    Carrier transitions: 11, Errors: 0, Drops: 0, Collisions: 0, Aged packets: 0, FIFO errors: 0, HS link CRC errors: 0, MTU errors: 0, Resource errors: 0
    Bit errors 13
    CRC/Align errors 47011 0
    FIFO errors 0 0
    Total errors 47011 0

    Could it be issue with bad patch cable connected on other side?

    Thanks in advance.

  • 2.  RE: CRC/Align , Framing errors: errors

    Posted 05-08-2022 09:18
    Yes, the crc will occur because some physical element in the patch is a problem.  And it could be on either side device that that the link shares.

    Seems like you have eliminated this side physical elements.

    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)