Hi guys,
This is linked to post:
EX4200 Boot Loop | Junos OS (juniper.net)I got my hands on another EX4200 which boots up perfectly ok. Being second hand it is still showing as a linecard of a previous virtual chassis:
root> show virtual-chassis
Virtual Chassis ID: 186e.8301.d7d4
Virtual Chassis Mode: Enabled
Mstr Mixed Neighbor List
Member ID Status Serial No Model prio Role Mode ID Interface
0 (FPC 0) NotPrsnt XXXXXXXXXXX ex4200-48p
1 (FPC 1) NotPrsnt XXXXXXXXXXX ex4200-48p
2 (FPC 2) Prsnt XXXXXXXXXX ex4200-48p 128 Linecard* N
3 (FPC 3) NotPrsnt XXXXXXXXXXX ex4200-48p
4 (FPC 4) NotPrsnt XXXXXXXXXXX ex4200-48p
Even after running 'request system zeroise' the configuration still shows up like this. Is there any other way to remove what appears to be an old config?
This switch is running 11.2R1.2 firmware.