I have an HP directly connected to my EX4300 on port 46 that I configured as a trunk. but when I do show route the HP does not come up as a directly connected device. The HP has an ip address of 192.168.2.218. I created a static route for the default route and it automatically points it out me0 instead of the trunk. Why is it doing this???
Net_Admin# run show route
inet.0: 3 destinations, 3 routes (3 active, 0 holddown, 0 hidden)
Limit/Threshold: 32768/32768 destinations
+ = Active Route, - = Last Active, * = Both
0.0.0.0/0 *[Static/5] 02:46:21
> to 192.168.2.1 via me0.0
to 192.168.2.218 via me0.0192.168.2.0/23 *[Direct/0] 04:21:55
> via me0.0
192.168.2.10/32 *[Local/0] 04:21:55
Local via me0.0