Blogs

How do I verify the FRUs supported by the Junos Continuity software package?

By tmoovana posted 02-23-2016 20:56

  

Question

How do I verify the FRUs supported by the Junos Continuity software package?

Answer

You can use the show system software details command after you install the Junos Continuity software package on the router.

For example, in the following sample output, the Hardware Supported field shows the line cards that the Junos Continuity software package supports.

 

user@router> show system software detail    
fips-mode-x86-32-20151223.164524_builder_junos_151_f4  --  fips mode
Requires: junos-runtime32
Provides:
jam-mpc7-8-9-x86-64-15.1F4.15-C1.9  --  jam mpc7 8 9
Hardware Supported: MPC7E 3D 40XGE, MPC7E 3D MRATE-12xQSFPP-XGE-XLGE-CGE,
                    MPC8E 3D, MPC9E 3D, MRATE-12xQSFPP-XGE-XLGE-CGE MIC,
                    Switch Fabric Board 2 (SFB2)
Requires: kernel64
Provides: jam-mpc7-8-9-64
Required by:
jdocs-x86-32-20151223.164524_builder_junos_151_f4  --  jdocs
Requires: junos-runtime32
Provides:
jpfe-X2000-x86-32-20151223.164524_builder_junos_151_f4  --  jpfe X2000
Requires: junos-runtime32
 Provides:
jpfe-common-x86-32-20151223.164524_builder_junos_151_f4  --  jpfe common


...

For more information about installing Junos Continuity software and verifying the hardware components that a package supports, see Installing Junos Continuity Software Package.


#JUNOS
#FAQ
#Junoscontinuitysoftware