Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  VMX SR-IOV on ESXI not working

    This message was posted by a user wishing to remain anonymous
    Posted 06-03-2022 06:22
    This message was posted by a user wishing to remain anonymous

    HI,
    I have setup vCP & vFP using  vmx Junos: 19.4R3-S8.6. if I setup all the interface using E1000 and lite-mode, all just working fine.
    But when I change all the interface to use the SR-IOV, the FPC can not be online, it always on testing.
    does any one have success setup using SR-IOV on ESXI?

    I use Intel NIC X550, ESXI 6.7U3, I have follow the juniper kb Enabling SR-IOV for VMware
    Juniper remove preview
    Enabling SR-IOV for VMware
    You can configure VLAN tagging on SR-IOV interfaces on vMX instance deployed in VMware ESXi host with the following steps:: We've used the hardware and software combination for the following procedure: VMware ESXi version 6.5 Update 3 i40en driver version 1.10.6 for Intel 700 Series network adapters Firmware version 7.20 for Intel 700 Series network adapters Enter the CLI configuration mode after logging in to the vMX.
    View this on Juniper >

    but no luck.


    Regards


  • 2.  RE: VMX SR-IOV on ESXI not working

    Posted 06-06-2022 11:27
    Testing is what I have found to be a normal and functional state for vMX FPC's (linecards)...

    root@R05>

    root@R05> show chassis fpc
    Temp CPU Utilization (%) CPU Utilization (%) Memory Utilization (%)
    Slot State (C) Total Interrupt 1min 5min 15min DRAM (MB) Heap Buffer
    0 Online Testing 87 0 90 77 76 511 32 0                     <<<---------------- mine is in Testing mode
    1 Empty
    2 Empty
    3 Empty
    4 Empty
    5 Empty
    6 Empty
    7 Empty
    8 Empty
    9 Empty
    10 Empty
    11 Empty

    root@R05> show ospf neighbor
    Address Interface State ID Pri Dead
    10.1.0.13 ge-0/0/1.0 Full 10.0.0.4 128 37

    root@R05> show arp no-resolve interface ge-0/0/1.0
    MAC Address Address Interface Flags
    50:00:00:0e:00:02 10.1.0.13 ge-0/0/1.0 none

    root@R05>

    root@R05> ping 10.1.0.13
    PING 10.1.0.13 (10.1.0.13): 56 data bytes
    64 bytes from 10.1.0.13: icmp_seq=0 ttl=64 time=640.763 ms
    64 bytes from 10.1.0.13: icmp_seq=1 ttl=64 time=562.978 ms
    64 bytes from 10.1.0.13: icmp_seq=2 ttl=64 time=227.868 ms
    ^C
    --- 10.1.0.13 ping statistics ---
    3 packets transmitted, 3 packets received, 0% packet loss
    round-trip min/avg/max/stddev = 227.868/477.203/640.763/179.143 ms

    root@R05> show system information
    Model: vmx
    Family: junos
    Junos: 18.2R1.9
    Hostname: R05

    ------------------------------
    Aaron Gould
    Senior Network Engineer
    aaron@gvtc.com
    https://www.linkedin.com/in/agould123/
    ------------------------------