Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



SRX300: providing DHCP information on 2 vlans fails

This thread has been viewed 5 times
  • 1.  SRX300: providing DHCP information on 2 vlans fails

    Posted 08-11-2022 09:44
      |   view attached

    Hi all, my first post, first setup of SRX (have an old 5GT-ADSL) - newby sorry, please be patient.

    My problem: I have 3 zones: mgmt, office, wifi distributed over ge-0/0/1 to ge-0/0/5.
    vlan office on ge-0/0/2 and ge-0/0//3 (irb.10), vlan wifi on ge-0/0/4 and ge-0/0/5 (irb.20). setting up the dhcp services for clients always only 1 vlan is provided with dhcp-info. Tried many things - deleting the vlans, ifaces and so on - cannot get it to run. Here the relevant parts of my config:

    dhcp-local-server {
    group maxxitPoolGroup {
    interface ge-0/0/1.0;
    interface irb.10;
    interface irb.20;
    }
    }

    access {
    address-assignment {
    pool mgmtPool_Range {
    family inet {
    network 172.16.2.0/24;
    range mgmtRange {
    low 172.16.2.10;
    high 172.16.2.29;
    }
    dhcp-attributes {
    server-identifier 172.16.2.1;
    domain-name maxxit.mgmt;
    name-server {
    192.168.1.2;
    217.237.148.102;
    8.8.8.8;
    }
    router {
    172.16.2.1;
    }
    netbios-node-type b-node;
    propagate-settings ge-0/0/1.0;
    }
    }
    }
    pool officePool_Range {
    family inet {
    network 172.16.3.0/24;
    range officeRange {
    low 172.16.3.50;
    high 172.16.3.149;
    }
    dhcp-attributes {
    server-identifier 172.16.3.1;
    domain-name maxxit.office;
    name-server {
    192.168.1.2;
    217.237.148.102;
    8.8.8.8;
    }
    router {
    172.16.3.1;
    }
    netbios-node-type b-node;
    propagate-settings irb.10;
    }
    }
    }
    pool wifiPool_Range {
    family inet {
    network 172.16.4.0/24;
    range wifiRange {
    low 172.16.4.20;
    high 172.16.4.99;
    }
    dhcp-attributes {
    server-identifier 172.16.4.1;
    domain-name maxxit.wifi;
    name-server {
    192.168.1.2;
    176.103.130.131;
    217.237.148.102;
    }
    router {
    172.16.4.1;
    }
    netbios-node-type b-node;
    propagate-settings irb.20;
    }
    }
    }
    }
    }
    vlans {
    vlan-office {
    vlan-id 10;
    l3-interface irb.10;
    }
    vlan-wifi {
    vlan-id 20;
    l3-interface irb.20;
    }
    }
    protocols {
    l2-learning {
    global-mode switching;
    }
    rstp {
    interface all;
    }
    }
    Maybe anybody can help me whats going wrong - thx i.a.
    Max



    ------------------------------
    maxxman
    ------------------------------

    Attachment(s)