SRX

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



SRX chassis cluster accessport endpoint source NAT to Reth1.100 interface

This thread has been viewed 3 times
  • 1.  SRX chassis cluster accessport endpoint source NAT to Reth1.100 interface

    Posted 08-18-2022 11:11
    Can I source NAT a statically assigned server ip that is connected via Node 0 port ge-0/0/10 and have the private ip translated to 100.100.100.3 ip of RETH1 subinterface 100 which is vlan-id 100.




    Thank you for any suggestions or if you could point me to the appropriate article that would be great, thank you.

    ------------------------------
    D POM
    ------------------------------