Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Question on syslog severity levels

     
    Posted 20 days ago

    Hi.

     

    When I configure a syslog severity level, are higher severity levels also included?

     

    In other words, if I configure a syslog severity level of 'warning', will syslog messages of severity level 'emergency' be logged?

     

    Thanks,

    Deepak


    Juniper Business Use Only



  • 2.  RE: Question on syslog severity levels
    Best Answer

     
    Posted 20 days ago
    Yes, you set the level and all higher priority are included.

    https://supportportal.juniper.net/s/article/Junos-Severity-level-configuration-on-syslog-messages

    -------

    The Junos OS logs syslog message whose priority is equal and higher than the configured numerical value: (eg. If the severity level "warning(4)" is set, syslog message whose severity levels of emergency(0), alert(1), critical(2), error(3), and warning(4) are logged.). There are two exceptions to this rule. No messages are logged by setting "none", and all severity levels are logged by setting "any".


    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------



  • 3.  RE: Question on syslog severity levels

     
    Posted 19 days ago
    Got it. Thanks Steve!