View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

Question on EVPN-VXLAN aliasing and BGP multipath

This thread has been viewed 3 times
  • 1.  Question on EVPN-VXLAN aliasing and BGP multipath

    Posted 08-11-2022 02:40



    Let's say I have three Leaf VTEPs -  L1, L2 and L3. L2 and L3 are multihoming the same ethernet segment, and so are both advertising Type 1 per-EVI route for that ethernet segment. So when L2 advertises a Type 2 route containing on of that ethernet segment's MAC addresses, L1 installs a MAC table entry towards that MAC address with VTEP tunnels to both L2 and L3 as next hops. This would be called aliasing.


    My question is – for L1 to perform this aliasing, does its BGP overlay configuration need to be configured with multipath?





    Juniper Business Use Only