Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



qfx3500 fiber-channel

This thread has been viewed 6 times
  • 1.  qfx3500 fiber-channel

    Posted 07-06-2022 10:15

    Hello,

    I'm trying  create fiber-channel interface. i used this article Example: Setting Up Fibre Channel and FCoE VLAN Interfaces in an FCoE-FC Gateway Fabric .
    But in result is:

    pnd@qfx2# show interfaces fc-0/0/0
    unit 0 {
        ##
        ## Warning: configuration block ignored: unsupported platform (qfx3500s)
        ##
        family fibre-channel {
            port-mode np-port;
        }
    }
    
    
    
    pnd@qfx2# show chassis
    aggregated-devices {
        ethernet {
            device-count 10;
        }
    }
    fpc 0 {
        pic 0 {
            fibre-channel {
                port-range 0 5;
                port-range 42 47;
            }
        }
    }
    


    JunOs version is 15.1R7.9. also i tried 14.1X53-D47.4, 14.1X53-D49.1

    What have i missed ?

    Thanks!



     



    ------------------------------
    leonid khorolets
    ------------------------------