Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  proxy-arp on 19.4R3-S8.6

    Posted 07-09-2022 04:12

    Hi, all.

    HW: MX104, 19.4R3-S8.6

    Interface configuration:
    x@router0> show configuration interfaces ge-0/0/4.1031
    proxy-arp;
    vlan-id 1031;
    family inet {
    unnumbered-address lo0.1;
    }

    Route table:
    Internet.inet.0: 856733 destinations, 1583377 routes (856733 active, 0 holddown, 0 hidden)
    + = Active Route, - = Last Active, * = Both

    1.2.3.8/29 *[BGP/170] 1d 20:29:49, localpref 100, from x.x.x.x
    ...

    x@router0> monitor traffic no-resolve interface ge-0/0/4.1031
    verbose output suppressed, use <detail> or <extensive> for full protocol decode
    Address resolution is OFF.
    Listening on ge-0/0/4.1031, capture size 96 bytes

    10:54:17.148597 In arp who-has 1.2.3.11 tell 1.2.4.147
    10:54:18.166338 In arp who-has 1.2.3.11 tell 1.2.4.147
    10:54:19.190364 In arp who-has 1.2.3.11 tell 1.2.4.147
    10:55:17.118386 In arp who-has 1.2.3.11 tell 1.2.4.147
    10:55:18.135908 In arp who-has 1.2.3.11 tell 1.2.4.147
    10:55:19.159885 In arp who-has 1.2.3.11 tell 1.2.4.147

    The problem is that the router does not respond to arp requests coming from client's side (client ip, that connected to ge-0/0/4.1031 is 1.2.4.147/20).

    proxy-arp is set (tried to set unrestricted, but nothing changes).  The route to network 1.2.3.8/29 is in the routing table. What could be the problem?



  • 2.  RE: proxy-arp on 19.4R3-S8.6

    Posted 07-09-2022 06:02
    I'm not sure I follow the configuration but it looks like the following.

    You have the loopback on the interface facing the client and you want to proxy arp for a  device on this interface.

    SRX will proxy arp on an interface that includes a subnet for traffic being processed by nat and security policy rules, not for outside devices.

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------



  • 3.  RE: proxy-arp on 19.4R3-S8.6

    Posted 07-09-2022 06:13
    On vMX (18.4)  there is no such problem with the same configuration :)