Switching

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Odd messages with in Syslog entries

This thread has been viewed 10 times
  • 1.  Odd messages with in Syslog entries

    Posted 07-14-2022 10:59
    We have been slowly replacing some Cisco Switches with Juniper EX2300 across our campus. Over the past two months we have replaced 18 and out of those 18 we had three all of sudden report some critical errors.  These errors were reported to our Solarwinds/Orion system. 

    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: NIST_FAIL_IRQ: 0
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: dev.bcmrng.#.underflow_maxcycle: 2
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: FIFO_UNDER_RUN_IRQ: 0
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: dev.bcmrng.#.rounds: 115435374
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: 512 bit FIFO configured
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: MASTER_FAIL_LOCKOUT_IRQ: 2147483648
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: dev.bcmrng.#.underflow: 31156042
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: TOTAL_BITS_MAX_IRQ: 2
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: FIFO_FULL_IRQ: 0
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: RBG_DIV_CTRL: 03
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: RBG RESET! (1x)
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: RNG rev 2, RBG rev 1
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: TOTAL_BITS_COUNT_IRQ: 1
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: TOTAL_BIT_COUNT_THRESHOLD: 36864
    7/4/2022 9:56:46 PM Critical kernel: bcmrng0: RNG_TOTAL_BIT_COUNT: 4294967295


    All of the switches are:  Model: ex2300-48p / Junos: 20.4R3-S3.4


    I have searched as far as I could trying to find out what could cause this and if its an issue or just a fluke instance. During the time the switches reported these errors there was no usage on them.

    Any information or help or ideas will be greatly appreciated.

    ------------------------------
    david brown
    ------------------------------