Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Need assistance with label-unicast

This thread has been viewed 1 times
  • 1.  Need assistance with label-unicast

    Posted 06-13-2022 09:41
    I have two Router reflectors in two different AS for inter-Provider option C. When I came across two different ways to configure label-unicast  in RRs.

    I tested the following:

    On RR1 in AS1

    set protocols bgp group iBGP family inet labeled-unicast resolve-vpn      <<--- remote RR2 loopback in both inet.0 and inet.3

    On RR2 in AS2

    set protocols bgp group iBGP family inet unicast

    set protocols bgp group iBGP family inet labeled-unicast rib-group RR1-loopback

    set protocols bgp group iBGP family inet labeled-unicast rib inet.3

    set routing-options rib-groups RR1-loopback import-rib inet.3

    set routing-options rib-groups RR1-loopback import-rib inet.0

    set routing-options rib-groups RR1-loopback import-policy RR1-loopback

    set policy-options policy-statement RR1-loopback term 1 from route-filter 11.11.11.11/32 exact

    set policy-options policy-statement RR1-loopback term 1 then accept

    set policy-options policy-statement RR1-loopback term 2 then reject   


    Also Remote RR1 in AS1 loopback in both inet.0 and inet.3


    The L2 and L3 vpn works fine.  I like to know whether any difference when I select which one to use.

    thanks !!