Wireless

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  Mist EDGE explanation

    Posted 08-18-2022 09:56
    Hello

    Maybe a dumb question, but I cant seem to find a clear answer.
    Can someone confirm that this a correct understanding of how it works:

    I set my AP with an SSID and have that mapped to a VLAN "100".
    I configure the AP to tunnel this vlan to the mist edge to the Tunnel IP.

    my client attaches to the SSID and the traffic is tunneled to the Mist EDGE and the dumped out the uplink port on vlan "100"?

    this is essentially a L2 stretch?  So I need to have DHCP scopes etc provided from my upstream device on vlan "100"?

    Is this a correct understanding?

    ------------------------------
    William Jackson
    ------------------------------


  • 2.  RE: Mist EDGE explanation

    Posted 08-19-2022 07:50
    Hi,

    Just imagine u extend SSID from your office to your home. That's the purpose of Mist Edge.


    Thanks