View Only


This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.

  • 1.  How to clear ospf database ?

    Posted 05-19-2022 18:49
    I have a small topology with 4 Routers in area 0. I have 4 type 1 in ospf database. I shut down one then run clear ospf database, I still see 4 type 1.

    Anyone to purge that one out ?

    thanks !!

  • 2.  RE: How to clear ospf database ?

    Posted 05-20-2022 05:57
    Likely this is from the other routers.  The db is shared so when you clear one router it will just learn the cleared entries from the others until the time out finally does occur.

    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP)

  • 3.  RE: How to clear ospf database ?

    Posted 05-20-2022 13:36
    thanks !!

  • 4.  RE: How to clear ospf database ?

    Posted 06-07-2022 09:53
    Once the MaxAge is reached (3600 seconds) by either timer or sent by the router/originator of the Router LSA, the Router LSA would be flushed accordingly.