Junos OS

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  High CPU value in FPC

    Posted 05-25-2022 16:49

    I rebooted the box and when the box returned I identified that the FPC CPU was high all the time. Some customers are complaining that they are losing packets and having high latency in services using VPLS. I noticed that the ISR is set to a high value. Is there any way to verify the reason for such a high value in the ISR?
    Model: mx10003
    Junos: 19.4R3.11

    root@JUNOS.ALOO.SPO> start shell pfe network fpc0

    SMPC platform (1750Mhz Intel(R) Atom(TM) CPU processor, 3168MB memory, 8192KB flash)

    SMPC0(JUNOS.ALOO.SPO vty)# show sched
    Total system uptime 12+18:24:13, (1102978445 ms), 819538377 thread dispatches
    CPU load is 100% (1 second), 82% (5 second)
    86% (10 second), 88% (1 minute)
    Total interrupt time 527200839 (ms)

    CPU Name Time(ms)
    16% Idle 182005084
    35% Threads 393847787
    47% ISR 527200839
    47% Level 1 525025744
    0% Level 6 2175095

    Last Long Running Thread Event time 100 ms

    CPU Name Time(ms) Count
    13% Level 1 13 43

    Top Thread:
    pid = 47
    name = TNPC CM
    time = 76396895 ms
    cpu = 6%

    root@JUNOS.ALOO.SPO# run show chassis fpc
    Temp CPU Utilization (%) CPU Utilization (%) Memory Utilization (%)
    Slot    State      (C)    Total    Interrupt    1min    5min    15min    DRAM (MB)    Heap    Buffer
    0         Online    58        79             46             85          85           85               3168               29            25
    1         Online    59        65             33             66          66           68               3168               29            24



    ------------------------------
    DIEGO TEIXEIRA
    ------------------------------


  • 2.  RE: High CPU value in FPC

    Posted 05-26-2022 08:44
    I'm not sure what ISR is or how to show more details, but are there any log messages that might help?

    show log messages | match fpc


    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------



  • 3.  RE: High CPU value in FPC

    Posted 05-26-2022 09:48
    I saw some DDoS LOGS but I think these logs would be affecting the threads processing, right?

    May 26 06:28:45 JUNOS.ALOO.SPO jddosd[8794]: DDOS_PROTOCOL_VIOLATION_SET: Warning: Host-bound traffic for protocol/exception TTL:aggregate exceeded its allowed bandwidth at fpc 1 for 130 times, started at 2022-05-26 06:28:45 BRT
    May 26 06:33:56 JUNOS.ALOO.SPO jddosd[8794]: DDOS_PROTOCOL_VIOLATION_CLEAR: INFO: Host-bound traffic for protocol/exception TTL:aggregate has returned to normal. Its allowed bandwith was exceeded at fpc 1 for 130 times, from 2022-05-26 06:28:45 BRT to 2022-05-26 06:28:55 BRT
    May 26 08:47:03 JUNOS.ALOO.SPO jddosd[8794]: DDOS_PROTOCOL_VIOLATION_SET: Warning: Host-bound traffic for protocol/exception TTL:aggregate exceeded its allowed bandwidth at fpc 1 for 131 times, started at 2022-05-26 08:47:02 BRT
    May 26 08:52:06 JUNOS.ALOO.SPO jddosd[8794]: DDOS_PROTOCOL_VIOLATION_CLEAR: INFO: Host-bound traffic for protocol/exception TTL:aggregate has returned to normal. Its allowed bandwith was exceeded at fpc 1 for 131 times, from 2022-05-26 08:47:02 BRT to 2022-05-26 08:47:05 BRT
    May 26 09:18:03 JUNOS.ALOO.SPO jddosd[8794]: DDOS_PROTOCOL_VIOLATION_SET: Warning: Host-bound traffic for protocol/exception TTL:aggregate exceeded its allowed bandwidth at fpc 1 for 132 times, started at 2022-05-26 09:18:03 BRT
    May 26 09:26:28 JUNOS.ALOO.SPO jddosd[8794]: DDOS_PROTOCOL_VIOLATION_CLEAR: INFO: Host-bound traffic for protocol/exception TTL:aggregate has returned to normal. Its allowed bandwith was exceeded at fpc 1 for 132 times, from 2022-05-26 09:18:03 BRT to 2022-05-26 09:21:28 BRT

    ------------------------------
    DIEGO TEIXEIRA
    ------------------------------



  • 4.  RE: High CPU value in FPC

    Posted 06-23-2022 08:36
    Has anyone else had this behavior in the box?

    ------------------------------
    DIEGO TEIXEIRA
    ------------------------------