Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



EVPN MPLS Single Active - IRB gratuitous arp

This thread has been viewed 8 times
  • 1.  EVPN MPLS Single Active - IRB gratuitous arp

    Posted 05-29-2022 11:00
    Hello,

    In an EVPN single active scenario when the DF switches over due to failure of PE-CE LAG interface, the IRB interfaces on the new DF do not seem to be sending gratuitous arp.  Problem I am facing is the host connecting to SWCH-01 is sending traffic upstream towards MX480. On DF switchover the SWCH-01 still sends the traffic from the host towards west instead of east as the MAC table on SWCH-01 is still pointing west towards MX480-01 (old DF). This traffic is dropped between EX4300-01 and SWCH-01.

    What mechanism (in EVPN) could I possibly use to avoid this traffic black holing due to incorrect MAC entry on SWCH-01? I thought if I could get the MX480 to send gratuitous arp then gateway (MX480-02) MAC will be re-programmed on Access Switch (SWCH). But this seems to be not possible as IRB stays UP at all times in the Non-DF.


    Thanks and Regards
    karthik


    ------------------------------
    Karthik Meivelu
    ------------------------------