Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



  • 1.  CSPF Juniper

    Posted 06-28-2022 07:04
    Hi Team, 

    do we have command to run cspf for particular destination in Junos ? 

    Below is cisco command :-

    show mpls traffic-eng topology path destination x.x.x.x



    BR://
    SK


  • 2.  RE: CSPF Juniper

     
    Posted 06-28-2022 08:22
    Hi Sunil.

    In Junos, you configure an RSVP-signalled LSP using :
    set protocols mpls label-switched-path LSP1 to 192.168.9.1

    You must configure the egress of the LSP. CSPF will be run by default. You can disable CSPF by adding the no-cspf keyword.

    --Deepak


  • 3.  RE: CSPF Juniper

    Posted 06-29-2022 10:34
    Hello,

    If you are trying to see the computed path (computed ERO).

    show mpls lsp ingress name <LSP NAME > extensive
    show mpls lsp egress name <LSP NAME > extensive

    JA

    ------------------------------
    JARROD ANDREWS
    ------------------------------



  • 4.  RE: CSPF Juniper

    Posted 06-30-2022 11:23
    Hi 

    Thanks for your response , but i'm not looking commands to show the lsp details or to configure the lsp . 

    below command in other vendors  will just run the cspf algorithm for particular destination and shows the output of computed hops without creating LSP.  same i'm looking in Junos. 

    Cisco : - show mpls traffic-eng topology path destination x.x.x.x
    Huawei:- display mpls te cspf destination x.x.x.x
    Nokia: - tools perform router mpls cspf to x.x.x.x







    BR://
    Sunil Kumar