Routing

 View Only

IMPORTANT MODERATION NOTICE

This community is currently under full moderation, meaning  all posts will be reviewed before appearing in the community. Please expect a brief delay—there is no need to post multiple times. If your post is rejected, you'll receive an email outlining the reason(s). We've implemented full moderation to control spam. Thank you for your patience and participation.



Expand all | Collapse all

Configure ae1.44 port for VLAN but it no communication

This thread has been viewed 7 times
  • 1.  Configure ae1.44 port for VLAN but it no communication

    Posted 06-22-2022 19:24

    Hi Friends

    Nikhil here,

    i need your help to configure vlan.
    i've srx550 hm -> core switch CISCO 

    i configure vlan on core switch 10.44.0.2/24 and gateway configure on juniper srx 550 as ae1.44    10.44.0.1/24 but both are not communicate

    he able to ping own self


    so need help




    ------------------------------
    NIKHIL BHAGAT
    ------------------------------


  • 2.  RE: Configure ae1.44 port for VLAN but it no communication

    Posted 06-27-2022 06:07
    Can you share your port configurations for the connections so we can see what is missing?

    ------------------------------
    Steve Puluka BSEET - Juniper Ambassador
    IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP - Retired)
    http://puluka.com/home
    ------------------------------