View Only


Get answers on switching topics, including the EX and QFX portfolios, and share your expertise.

To easily navigate to other communities, select Communities > All Communities in the navigation.

Latest Discussion Posts

  • Hello! I have an 2 EX3400 set up in a VC on a site connected to our ISP's MPLS Cisco Router, they share 3 vlans on a trunk interface (layer 3) with a link-net, each of thees VLANS is connected to a separate routing-instance (VR) and share routes based ...

  • Hi. Let's say I have three Leaf VTEPs - L1, L2 and L3. L2 and L3 are multihoming the same ethernet segment, and so are both advertising Type 1 per-EVI route for that ethernet segment. So when L2 advertises a Type 2 route containing on of that ...

  • Upgraded the switch last night and that seems to have solved the problem. The switch was displaying "booted from backup junos" but all partitions had same firmware version on them. ------------------------------ ANKUR ------------------------------

  • Profile Picture

    RE: EX2300 switches

    Hi You can check this documentation to see if it includes the EX2300. https://support.juniper.net/support/eol/product/ex_series/ ------------------------------ GARY WU ------------------------------

  • Is there any other way to accomplish this via CLI? I have another EX4550, but it's in production and I'm afraid it might magically revert to some unusable state like this one did when I put it on the network.



  • Join the Innovators Circle community

    Lend your voice and make an impact at Juniper. 

    The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.