I running a collapsed spine environment into two qfx5120-ym switches, in this we have L3 multihomed irb interfaces. When testing failover during a reboot of one of the switches an outage for irb interfaces of 10-16 seconds occure. Is there a way to ...
I did more tests to find they are the same. I can configure L3 gateway on the spine node (L3 GW).
I have the following topology:
When I use vXLAN as data plane, I can configure L3 gateway on a L3 Gateway router, but when I use mpls as data plane, I could not. Seems I have to configure irb interface on L2 gateways. Is that true ? thanks !!
If I need two vni to use the same vrf-target, can I do the following?
set routing-instances evpn1 protocols evpn vni-options vni 11 vrf-target target:11:12
set routing-instances evpn1 protocols evpn vni-options vni 12 vrf-target target:11:12
Hung, Please review Juniper's Data Center solution page here. https://www.juniper.net/us/en/solutions/data-center.html You will find Apstra is the preferred platform for for Day 0,1,2 management of standard EVPN/VXLAN fabrics. Thank you
On July 13, 2021, @Melchior Aelmans hosted Elevate Community Ambassador @Christian Scholz (chsjuniper) ...
Juniper has transitioned EngNet to Elevate, bringing over our technical forum where Juniper and all of you can share and benefit from automation scripts/ideas/Q&A.
You are all welcome to leverage it!
Here are just a few reasons to join this new community:
Members who submit content or respond to questions in the community may:
We hope you find value in this technical forum.