Hi, As per the below documentation this feature for preference based DF election is only supported on the MX platforms. https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/preference-df-election-df-election-type.html ...
Hi We have Juniper QFX5100s running randomly dropping MPLS ccc L2 circuits. They are running 17.3R3-S1.5. Configuration is basically: set protocols l2circuit neighbor 1.2.3.4 interface xe-0/0/8.0 virtual-circuit-id 418 set protocols l2circuit ...
I have a scenario where I have 2, but could end up being 3 leaves(leaf switches) that will belong to the same ESI. I want to be able to control which of one of these 2(or3) leaves will be the elected DF(designated forwarder). I know on the MXs, there ...
thanks a lot !!
Hi, The route with * will be the path taken since it has the lowest AD. All the vlans can use the default route if there is no specific route. Access-internal routes are created when the device is used for DHCP. HTH