Routing

 View Only

Welcome!

Get answers on all things routing, including routing portfolios and protocols. Post here or in the following product groups: 

vMX

To easily navigate to other communities, select Communities > All Communities in the navigation.

Latest Discussion Posts

  • A route must be in the table to be advertised. Typically you would create either a local static route or aggregate route for the prefix not normally in the table and then create the appropriate policy for that. ------------------------------ Steve ...

  • Hi Is is possible in Juniper to advertise routes not existed in the routing table ? Like in FortiGate it is possible with: set network-import-check disable​ But I couldn't find in Juniper command other than: set protocols bgp group XYZ advertise-inactive​ ...

  • I have a question about LSP. So, we are configured the Dynamic LSP, but, if we have a link fail in the middle path, this LSP down and fastly stay up. We use a FRR in all devices, but even though this LSP have a FLAP. This one secod that stay down, my ...

  • Hello Ankan, Good day ! Check if you have enabled ssh services ? Thanks Ruban ------------------------------ RUBAN PRASAT JOHNSON ------------------------------

  • We are looking for a way to limit the multicast streams a customer can tune into. I know we can use a firewall filter to accomplish this, but was wondering if there was an alternate way to accomplish this. Any help on this would be greatly appreciated. ...

Announcements

  • Join the Innovators Circle community

    Lend your voice and make an impact at Juniper. 

    The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.

  • How are we doing?

    Juniper is driving a company-wide initiative to further enhance our customers’ experience. Please tell us how we’re doing via a quick video that will be used for internal Juniper viewing only--none of it will be shared publicly!

    Please record your video here 

    Use your phone or laptop. It should take about 5-10 minutes, and you can review and re-record any segment at the click of a button. 

    Thank you in advance!