Looks like the interface specification is missing from the https protocol under web management. ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP) http://puluka.com/home ...
Hello community, Please I need help to find the problem for this problem. I have 2 firewalls and I'll try apply the J-WEB service. From de server I can ping the management IP, but telnet at 443 port isn't works. Is impossible to open the J-WEB in a browser. ...
Hi, Thanks for your answer. I see that many function are not supported on vSRX. I see that LAG on routed ports didn't support but I was able to do it and reachability is OK. Someone can confirm that LAG LACP with physical SRX is supported with Cisco ...
This message was posted by a user wishing to remain anonymous Hi, Following statement from juniper vSRX guide
Hi Folks, I have setup LAB to test Unicast RPF behavior for filter-based forwarding. My filter-based forwarding is working fine. I am able to route to different upstreams by changing the source IP at vsrx-1-CE. There is simple eBGP between vSRX-1,2,3,4 ...