Hello! I have an 2 EX3400 set up in a VC on a site connected to our ISP's MPLS Cisco Router, they share 3 vlans on a trunk interface (layer 3) with a link-net, each of thees VLANS is connected to a separate routing-instance (VR) and share routes based ...
Hi. Let's say I have three Leaf VTEPs - L1, L2 and L3. L2 and L3 are multihoming the same ethernet segment, and so are both advertising Type 1 per-EVI route for that ethernet segment. So when L2 advertises a Type 2 route containing on of that ...
Upgraded the switch last night and that seems to have solved the problem. The switch was displaying "booted from backup junos" but all partitions had same firmware version on them. ------------------------------ ANKUR ------------------------------
Hi You can check this documentation to see if it includes the EX2300. https://support.juniper.net/support/eol/product/ex_series/ ------------------------------ GARY WU ------------------------------
Is there any other way to accomplish this via CLI? I have another EX4550, but it's in production and I'm afraid it might magically revert to some unusable state like this one did when I put it on the network.
Lend your voice and make an impact at Juniper. The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.