If you have only a single pair with your 0.0.0.0/0 on the one side you can see if the proxy-id configuration option is available. In this case you also need to configure the routes into the tunnel then by either dynamic routing or static routes. https://supportportal.juniper.net/s/article/SRX-Understanding-how-proxy-IDs-are-generated-in-route-based-and-policy-based-VPNs ...
Hi, I have to configure an s2s vpn to a remote site and in the remote part they told me to enter 0.0.0.0/0 as the encryption domain towards their headquarters. I read that on vSRX this option is not provided and in fact it gives me an error. I wanted ...
Looks like the interface specification is missing from the https protocol under web management. ------------------------------ Steve Puluka BSEET - Juniper Ambassador IP Architect - DQE Communications Pittsburgh, PA (Metro Ethernet & ISP) http://puluka.com/home ...
Hello community, Please I need help to find the problem for this problem. I have 2 firewalls and I'll try apply the J-WEB service. From de server I can ping the management IP, but telnet at 443 port isn't works. Is impossible to open the J-WEB in a browser. ...
Hi, Thanks for your answer. I see that many function are not supported on vSRX. I see that LAG on routed ports didn't support but I was able to do it and reachability is OK. Someone can confirm that LAG LACP with physical SRX is supported with Cisco ...