Hello Guys, On my srx i have a reth interface configured with vlan-tagging for multiple vlans and i want to enable OSPF. What is best practice to do this. Is it wise to add only reth1 in ospf area 0, or do i need to add each of the interfaces (reth1.10, ...
No it doesn't overwrite the firewall filters configured under the interface. Actually the input firewall filter "manually" defined on the interface gets processed first, and then the flowspec filter gets processed. So in a sense you can sort of say the ...
Hi Jack, if i have to guess, the normal ping is using inet.0 while your traceroute is not, try enabling ICMP tunneling on your LSRs, that should allow the ICMP traffic to be send through the LSP and see each one of the labels in the path. set protocols ...
Hi. Does a firewall filter installed via BGP FlowSpec overwrite a manually configured firewall filter on an interface? Thanks, Deepak Juniper Business Use Only
In the topology below PE1's loopback address, 1.1.1.1 is able to ping PE2's 6.6.6.6. Both PE1 and PE2 are pushing labels to their next-hop LSR's. The LSR routers then transit the labels and swap them on each hop until reaching the PHP and popping the ...
Lend your voice and make an impact at Juniper. The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.
Juniper is driving a company-wide initiative to further enhance our customers’ experience. Please tell us how we’re doing via a quick video that will be used for internal Juniper viewing only--none of it will be shared publicly!
Use your phone or laptop. It should take about 5-10 minutes, and you can review and re-record any segment at the click of a button.
Thank you in advance!