Background of the problem We run OSPF between our routers over GRE, and we have multiples of them (4 in total) Router A ----- 4 x GRE tunnels ------ Router B The problem I'm seeing is that sometimes OSPF is stuck in the Loading State. I have seen ...
If you aren't wanting to use any of the firewall features, have you changed to packet mode? This removes all need of zones and security policies. Highly HIGHLY recommend you add a RE-Protect filter though. set security forwarding-options family ...
Hi We had configured ipsec from a Juniper vSRX to a cisco router. Phase2 lifetime - 3600s IKEv2 lifetime - 86400s But everytime ipsec was renegotiating, it was forcing ike also to renegotiate. Is this a known bug in Juniper vSRX? ------------------------------ ...
Hi, Are u sure you follow the guide? First connect the Control Link (direct connect)...Make sure control link is up. ..Then do command set chassis cluster cluster-id 1 node x reboot on both node manually. Then both will be reboot and form cluster. ...
Hello All, I have a problem with finish setup cluster on two SRX550 devices (firmware version 12.3X48-D105.4). I did everything according to this manual: https://supportportal.juniper.net/s/article/SRX-Getting-Started-Configure-Chassis-Cluster-High-Availability-on-a-SRX550-device?language=en_US ...