Hi. Does a firewall filter installed via BGP FlowSpec overwrite a manually configured firewall filter on an interface? Thanks, Deepak Juniper Business Use Only
In the topology below PE1's loopback address, 1.1.1.1 is able to ping PE2's 6.6.6.6. Both PE1 and PE2 are pushing labels to their next-hop LSR's. The LSR routers then transit the labels and swap them on each hop until reaching the PHP and popping the ...
Ok, further investigation shows the DHCP route as secondary, and as [Access-internal/12]. However, clients on the internal irb interfaces are unable to route out via this connection when the primary one goes down. In addition, if I try to ping out from ...
Yeah that I know I was only wondering if there is an option to force the Juniper router to advertise route not existed in the table. For now I'm advertising using the lo0 interface witch creates direct routes Anyway, Thanks Steve :) ------------------------------ ...
A route must be in the table to be advertised. Typically you would create either a local static route or aggregate route for the prefix not normally in the table and then create the appropriate policy for that. ------------------------------ Steve ...
Lend your voice and make an impact at Juniper. The Innovators Circle is a research-driven, private circle where members share feedback on a wide range of topics to help Juniper leaders make an impact on all business areas (e.g., marketing, products, digital experience, etc.). Members receive opportunities for rewards through e-gift cards and exclusive content.
Juniper is driving a company-wide initiative to further enhance our customers’ experience. Please tell us how we’re doing via a quick video that will be used for internal Juniper viewing only--none of it will be shared publicly!
Use your phone or laptop. It should take about 5-10 minutes, and you can review and re-record any segment at the click of a button.
Thank you in advance!